Masterpro BGMP-9332 Manual De Instrucciones página 5

EN
• Do not use the kettle outdoors.
• The base and exterior of the kettle are not water-resistant, keep it
dry at all times.
• Under no circumstances must the kettle be placed in water or any
liquid or come in contact with liquid. Do not handle the kettle with wet
or moist hands. Should the kettle become wet or moist, remove the
main plug from the socket immediately.
• Do not touch the contents of the kettle.
• Use the kettle only for its intended purpose.
• The kettle is only to be used with the stand provided.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
SPECIAL SAFETY INSTRUCTIONS FOR THE KETTLE
• Use only cold water when filling the device.
• The water level must be between the MAX. and MIN. marks.
• Switch the kettle off before removing it from the base.
• Always ensure that the lid is tightly closed.
• The base and exterior of the kettle must not become wet.
• Kettle body used must match with the kettle base.
FIRST USE OF THE KETTLE
Before using the kettle for the first time, fill the kettle with cold water
and boiled it twice without any additives.
1. Fill the kettle with water. Do not overfill. Use the water level
indicator.
2. Place the kettle on the base.
3. Electrical connection
- Check whether the electrical voltage which you intend to use is
the same as that of the kettle. Details can be found on the label on
the base of the kettle.
- Only connect the kettle to a properly installed 220-240V~
8
50-60Hz socket.
4. Switch the kettle to position '1'. The control lamp on the water
indicator shows that the water is being boiled.
5. After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring.
6. This appliance is intended to be used in household and similar
applications such as:
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
7. Avoid water spillage on connector during use.
8. WARNING: if the kettle is overfilled ,boiling water may be ejected.
9. WARNING: potential injury from misuse. The heating element
surface is subject to residual heat after use.
CLEANING
• Always remove the plug from the mains supply before cleaning the
kettle.
• The exterior of the kettle should be cleaned, if necessary, with a
slightly damp cloth without additives.
• The calcium filter can be removed for cleaning.
TECHNICAL SPECIFICATION
Voltage: 220-240V~, 50-60HZ
Rated Power: 1850-2200W
9
EN