DOMPEL FACILE Instrucciones De Montaje página 6

ENGLISH
INSTALLATION PLACE
lnstall your Dompel product in a leveled location with no
grooves or patches, avoiding rocking motion and vibration.
The place must be ventilated, not allowing direct incidence of
sunlight, it must be far from heat sources (stove, ovens, etc.)
and flammable products. A connection to a water source is
required to install this product.
SECURITY
Avoid accidents. Alter unpacking the product, keep the
packaging material out of the reach oi children.
INSTALLATION AND ASSEMBLY
1
Remove the height adjuster and position the
inner tube until it is visible. Reposition the
height adjuster in its original position until it is
properly tightened.
2
Manually fit the thicker end
of the tube (E) into the star
base (F). Make sure the
assembly is tight.
3
With the basin (A)
positioned upside down,
manually fit the other end
oi the tube (E) which will
already have the star base
attached as per (figure 1).