Publicidad
Idiomas disponibles
Idiomas disponibles
Bagger Operation
NOTE: When all three of the grass bins are full, place the tractor on a
firm, level surface, disengage the PTO (Blade Engage), turn the tractor
engine off and set the parking brake.
1.
Flip the seat up.
2.
Open grass catcher cover by pushing in on the rear, right-side tab
with your right-hand, as seen in 1 of Fig. 28, and lifting with your
left-hand in the rear center, 2.
2
1
Figure 28
Operation
3.
Remove the grass bins by lifting them up (1 in Fig. 29) and away
from the bin support assembly (2).
4.
Empty the grass clippings at a proper disposal site. Grasp the
handle at the bottom of the bin with one hand, and with the other
hand steady the bin, and empty the contents.
5.
Replace grass bins, close lid, flip down seat, restart your tractor
and resume cutting your grass.
15
2
1
Figure 29
Publicidad
