Exquisit KP3202 Manual De Instrucciones página 19

Mounting the handles
1. Turn the hob over and place it on a soft,
flat surface.
2. Place the handles on the side of the
plate so that the holes in the handles
line up with the holes in the plate.
3. Take the screws (1) and insert them
into the holes provided (2).
4. Tighten the screws with a Phillips
screwdriver.
Do not tighten the screws with

force so that the plastic of the
handles does not break.
11 Electrical connection
To ensure safe and fault-free operation of the
appliance, the following instructions must be
observed when making the electrical
connection:
Before connecting the appliance,

compare the connection data (voltage
and frequency) on the type plate with
those of your electrical network. This
data must match to prevent damage to
the appliance. If in doubt, contact a
qualified electrician.
The socket must be protected by a 16A

circuit breaker.
If an extension cable is used, it must

have a cross-section of at least 1.5
mm².
EN
Page | 19