airhood AH-01BE Manual Del Usuario página 4

HOW TO USE
■ Unpack and remove all packaging materials from the AirHood and accessories.
■ Check for damage. If any parts are damaged or missing, do not use the AirHood
and return it to your retail outlet immediately.
CHARGING THE BATTERY
1. Make sure the power switch is set to the off position O.
2. Connect the charging plug to the charging socket on the AirHood and plug the other
end into the mains socket.
– The indicator lights turn on sequentially to show the battery is charging and become
steady to indicate the level of battery charged. All 5 indicator lights are steady when
the battery is fully charged.
– Charge the battery fully the first time. This takes up to 3 hours and provides up to 3
hours of runtime depending on the power level used.
– After the first full charge of the battery, you can use the AirHood while the battery
is charging.
3. When the battery is full charged, unplug the charging cord from the AirHood and the
mains power socket.
6 | EN | Airhood (AH-01BE)
OPERATING INSTRUCTIONS
Your AirHood sucks in contaminated air and filters it. The front filter extracts heavier impurities
in the air such as fat, dust and water vapour, and the rear filter removes smoke, dirt and further
toxic contaminants. The purified air is then passed through the air diffuser on the back.
1. Connect to the power source.
Make sure the battery is charged or the charging cord is plugged in.
2. To attach the Base Boost (if purchased) to the AirHood, align the 4 nodules on the
Base Boost with the grooves on the bottom of the AirHood, and then twist the base
anticlockwise until it locks into place.
3. Slide the power switch to the desired setting:
SETTING MEANING
I
Low
II
Medium
III
High
O
Off
4. When you are not using the AirHood, make sure the power switch is in the off position O
and make sure it is disconnected from the power supply.
5. Stow your AirHood on a countertop or hang it up and create more space.
13.1" – 15.1"
Adjustable Height
Quiet operation
Optimal effectiveness, noise-compromise
Maximum power
Airhood (AH-01BE) | EN | 7