Mato Accu-Greaser 18V-LSP Instrucciones De Empleo página 12

Ordering spare parts:
When ordering spare parts the following information is required:
Type specification, designation of the ET, order number.
The following maintenance deadlines should be strictly observed to ensure trouble-free operation.
High-pressure hose
Nozzle
Battery charger
Checking for loose
connections
Legibility and availability of
information
6 Tips for fault diagnostics:
Symptom
The motor is not
running.
Device does not produce
grease.
Device continues with
the production of
grease.
The battery will not
charge.
7 Specifications:
Grease gun battery
Operating voltage:
Operating pressure:
Flow rate:
Sound power level:
Emission sound pressure level: L
Vibration emission value:
Threaded connection
for gripper nozzle:
Temperature:
Fluid media:
Grease of NLGI Class 000 to 2 (DIN 51818) can
be used.
Pastes without lubrication properties (with
abrasives) or silicon pastes must not be used.
8 Disposal
12
MATO GmbH & Co. KG
Before each use
Possible cause
The battery is empty or faulty.
The wiring to the motor is faulty.
The grease cartridge is empty.
The grease supply has been
interrupted.
As the cartridge fills with loose
grease, air bubbles become
trapped in the grease.
The cartridge or the cartridges
adapters are not screwed tight
enough.
Charger without power supply.
The battery remains too hot.
Battery faulty or worn out.
18 V
approx. 400 bar
approx.115 ccm/min
L 86 dB(A)
WA
78 dB(A)
pA
2
0,9 m/s
R1/8 "Operating
-18 to 50°C
After termination of use the device is to be disposed of in an environmentally
friendly manner in accordance with applicable statutory provisions.
Grease-tainted parts and batteries do not belong in the dustbin!
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel: +49(0)6108-906-0 / Fax:+49(0)6108-906-120
annually
X X
X X
X
X
X
Rectification
Charge or replace battery.
Remove the battery, dismantle the
handle and check for a loose
connection.
Check levels in the cartridge.
Tightly screw cartridge in place.
Exchange the cartridge with one that
is free of air bubbles.
Cartridge and / or cartridge adapter
screwed tight.
Check that the outlet has power.
Allow battery to cool before charging
Replace battery
Battery
Nomonal voltage:
Battery Type:
Capacity:
Weights: 2 Ah
Weights
High-performance battery grease gun
Complete set with case
Gun with 2 Ah battery and
grease container
Operating instructions
Accu-Greaser 18V-LSP
According to the manufacturer
X
X
18 V
Lithium-Ionen
2 Ah/36Wh
4 Ah/72Wh
0,35 kg
4 Ah 0,60 kg
5,4 kg
2,6 kg