esky HN-28 Manual Del Usuario página 6

Operation Instruction
Tuning indicator
Turning dial
1.Turn the ON/OFF/Vol+ or - Dial clockwise to power on the
radio and set a proper volume level.
2.Switch to FM or AM with the band selector. Extend the
antenna for a better signal reception
3.Turn tuning dial to select your desired station, and a yellow
tune indicator will turn on when the selected station is fully
engaged
4.When turning the tuning dial, it is normal to find the
dialis slightly tight. This design can reduce the frequency
deviation generated during a single rotation. preventing
the inability to catch radio stations within small frequency
sections.
5.lf the radio can receive a few stations or noisy stations. this
is usually caused by the interference of radio wave signals.
Please operate it in an open, flat place or a high position.
6.Long press the sos button to start the sos mode, at this
time there is an alarm sound accompanied by the flashlight
flashing
- 6 -
Band selector andle
ON/OFF Vol+/-