GARZA NILO Manual De Instrucciones página 33

27
LINKAGE OF IRRIGATION WITH THE APP / WIFI
17
Riego NILO
TEST
Once the devices are installed and paired, follow these steps to verify that everything is working correctly.
1
1. Close the faucet on which the Nile Controller is installed.
2. Press the on/off button until a click sounds. The internal valve of the Nile Controller will have opened.
3. Press the on/off button until a click sounds. The internal valve of the Nile Controller will have closed.
4. Open the tap slightly and press the same manual control button several times that you pressed before
(right or left). If the water flows and stops flowing based on the pulse, the test will have been successfully
completed. If the system does not respond correctly, please repeat the test from the beginning.
5. Open the faucet fully to use the Nile Controller normally.
Hub NILO
Hub NILO Controlador de riego NILO
2 3
clic!
When your Garza Smart app finds both devices (Hub and
Nile Controller), press finish*. You can modify the name of
your Nile Controller and your WiFi plug and indicate the
room in which it is installed (optional). Click finish again
and the linking process is complete.
*The Hub can only be used as a WiFi socket if
system-wide pairing has been completed as outlined
here.
10%
4
clic!
28
100%
5
clic!