Publicidad
Idiomas disponibles
Idiomas disponibles
1. BEFORE WELDING
Auto-Darkening welding helmet is designed to protect the welders eyes from harmful radiation including visible light,
ultraviolet radiation (UV) and infra-red radiation (IR) resulting from certain arc and gas weld in gcesses when used in
accordance with these User Instructions.
This welding helmet is suitable for all types of electro-weldings: covered electrodes, MIG/MAG,TIG/WIG, plasma
welding,cutting and laser welding (only selected models with two shade ranges i.e.5-8 and 9-13), except for gas welding.
• Never place the helmet or the filter on hot surface.
• Use only within the temperature range of -10°C to+60°C.
• Do not immerse the filter (auto-dakening filter) in water.
• Do not expose the filter to liquids and protect it from dirt.
• Regularly replace the cracked-scratched protection cover lens. If this helmet doesn't darken upon striking an arc, stop
welding immediately and contact your supervisor or your dealer.
2. MARKINGS
The filter is marked with the shade range and optical classification. The following is an example(EN379) :
KEEP WORKiNG
KEEP WORKiNG
Keep Working
WARNING
Make sure to remove any additional protection foil
from both sides of Protection Lens.
4/ /9-13 SWG 1/ 1/ 1/ 2/ E N 3 7 9 C E
Light shade
Dark shade DIN9-13
Manufacture identification
Optical class
Diffusion of light class
Variations in luminors transmitt ance class
Angle dependency class
Certification mark or number of standard
01
C S v M
7 6 0
Publicidad
