25. When the product is not used for a long time, it is recommended to recharge it once every
three months in order to preserve the life of the product.
B. POWER CORD SAFETY TIPS:
1. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
2. Never pull or yank on the cord or the appliance.
3. To insert plug, grasp it firmly and guide it into outlet.
4. To disconnect appliance, grasp plug and remove it from outlet.
5. Before each use, inspect the power cord for cuts and/or abrasion marks. If any are found,
this indicates that the appliance should be serviced and the power cord replaced. Please
return it to our Service Department or to an authorized service representative.
6. Never wrap the cord tightly around the appliance, as this could cause the appliance to fray
and break.
7. Do not operate appliance if the power cord shows any damage, or works intermittently and
stops working.
8. The plug should be placed in a convenient location, easy grip within reach so that it can be
quickly unplugged when needed.
C. COMPONENTS
D. INSTRUCTIONS FOR USE
1.
After unpacking the box, make sure that the accessories are complete, that the appliance is in good condition and
that the power cord is not damaged.
2.
Turn the knob (8) to the right to turn on the appliance and adjust the speed.
3.
When the fan stops working or is charging, turn the knob to the left and turn off the appliance.
4.
Press the "7" button on the fan to activate the lighting function.
Gently pressing the button a second time will activate the medium lighting, pressing the button a third time will
activate the high lighting, then press a fourth time to deactivate the lighting function.
5.
This product is equipped with a USB-Type C charging socket "7" and charging indicator (25%, 50%, 75%, 100%) "8".
While charging, the indicator is lit indicating that it has not been fully charged.
At the end of the recharge, the four lights will remain on with a fixed light.
1. Front protection net
2. Fan blade
3. LED lamp
4. Support bracket
5. Battery charging indicator
6. USB Type-C charging socket
7. LED lighting switch
8. Speed adjustment knob
6