Publicidad
Idiomas disponibles
Idiomas disponibles
Operational guide for remote control
The remote control will operate within a distance of 7M (23 ft) from the iF360BT. Always point the remote in the direction to the
front of speaker.
Keys
Input
ESC
FM/SD/USB AUX/
iPod Bluetooth
FM
0~9
USB / SD
FM
USB / SD
iPod
FM
USB / SD
MENU
iPod
FM
USB / SD
iPod
Bluetooth
FM-SD-USB-AUX-iPod-
SELECT
+ / -
ALARM TIME
RPT.
SHFL.
5
English
Press to
Return to normal operation of system/ exit menu and settings; disable the alarm.
Mute
Power on / Standby
Press
to select preset station. Press & hold a numeric '0-9' key
for approx. 2 seconds to assign the selected station to that numeric key.
Play the selected track
Manually tune to a higher / lower frequency in increments of 0.1MHz per operation.
Previous / next folder.
Navigate and scroll up / down the iPod/iPhone menus.
Press twice to select your region.
View title, artist's name and album title.
Navigate the iPod/iPhone sub-menus – Playlist; Artist; Songs; Videos and More.
Previous / next preset channel; press & hold: seek a higher / lower radio frequency
Previous / next track;
Press & hold: previous / next folder
Previous / next track;
Press & hold: fast rewind / forward in current track
Previous / next track
Select the corresponding audio input: FM-SD-USB-AUX-iPod-Bluetooth
Select item/Play
Play / Pause (not available in FM / AUX mode);
Press & hold to switch system between standby and on.
Volume +/- (0~50); Treble +/- (-8~+8); Bass +/- (-8~+8)
Time / Alarm / Sleep setting;
Press & hold to switch between 12-hour and 24-hour clock
Select track repeat mode: all repeat, folder repeat
Switch between "all repeat" and Shuffle
Power on
1. Connect the power cable to the speaker, then to the wall socket. The system is powered on.
2. Press
on remote control (or press & hold
on the top of speaker) to switch the system between standby and on.
3. Press "INPUT" to select source for playback.
FM turner controls
Selecting FM region
1. Press "MENU" twice, "Region Selection" appears on the screen
2. Press "SELECT" to select the region you require (China, Japan, United States, Australia, Wide
Range and Europe).
3. Press menu to exit
Auto / Manual search & store presets
FM Group
Preset
Frequency
Normal FM interface
Automatic Preset:
1. Press "MENU" once, "Start Auto Seek" appears on the screen.
2. Press "SELECT" key to enable system to start auto search and store the radio station.
3. Press
to select previous / next preset, press & hold to seek a higher / lower radio frequency.
Manually Preset:
There are 3 FM groups, FM1, FM2 and FM3 where each group can store 9 preset channels. Each group can be manually programmed to store 9
preferred FM stations for multiple users or personal preferences.
1. Press the FM button on the remote to choose group FM1, FM2 or FM3
2. Press
Manually tune to a higher / lower frequency in increments / decrements of 0.1MHz per operation.
3. When you find the frequency to set, press & hold a number 1~9 for 2 seconds to assign the radio stations.
Tip: a. Connect the wire antenna to the rear panel of the system for better radio signal.
b. Once the display has switched back to the default home screen, the radio is ready to play.
c. There are 9 available presets in each FM1, FM2 and FM3 making a total of 27 available presets.
d. For multiple user preferences, first manually fill the FM1 9 presets to allow a second set to be manually preset in FM2 and repeat for FM3.
Operational guide
Signal strength
6
English
Publicidad
