Publicidad
Idiomas disponibles
Idiomas disponibles
Operational guide
SD / USB input
1. Connect SD card/USB flash drive (MP3 or WMA format) to SD/USB connector.
2. Select audio input: press "INPUT" on the top of the speaker or "SD" / "USB" key on the
remote control to select the desired input.
3. Previous / next track: press
Previous / next folder: press
Play / Pause: press
Note: System will automatically play the first track after 8 seconds on the SD card/ USB flash
drive if no track or folder is being selected.
Tip: a. When using different inputs, the SD/USB input will automatically play the last played track when the SD/USB input is re-selected.
b. When the speaker system is rebooted, the system will revert back to play the first track in the SD card/ USB flash drive.
AUX input
1. Connect speaker to the external audio device (PC, MP3/MP4, mobile phone, etc.) with the
3.5mm-RCA audio connecting cable.
2. Audio input selection: press "INPUT" on the top of speaker or "AUX" key on the remote
control to select the AUX input.
Tip:
iPod
iPod input
iPhone
1. Connect iPod /iPhone (MP3 or WMA format audio source) to the dock.
2. Select audio input: press "INPUT" on the top of the speaker or "iPod" key on the remote
control to select the iPod input.
3. Press "MENU" to navigate the iPod/iPhone sub-menus – Playlist; Artist; Songs; Videos
and More.
4. Press
Tip: Press "MUTE" on the top of speaker or "
Bluetooth
General guideline for portable devices
1. Press "INPUT" on the top of the speaker or "
Bluetooth input, the screen displays "Bluetooth Disconnected".
2. Set your device (mobile phone, tablet device, MP3 player etc.,) to search and select
"EDIFIER Esiena BT". When the connection is made, the screen will display "Bluetooth
Connected".
7
English
(or press & hold
for 2 seconds)
are not available in AUX mode.
to navigate and scroll up / down the iPod/iPhone menu.
" key on remote control to shut speaker output.
" key on the remote control to select the
3. Play your audio device
Note:
are available only for the source devices that support AVRCP (Audio / Video
Remote Control Profile).
When connecting to a Bluetooth Source device (e.g. mobile phone), make sure the
source device supports A2DP (Advanced Audio Distribution Profile)
PIN code for connection is "0000" if needed.
Bluetooth
General guideline for computer connection
1. Press "INPUT" on the top of the speaker or "
" key on the remote control to select the Bluetooth input.
2. Turn on your Bluetooth settings on your computer to be discoverable and enabled.
3. If your computer does not have Bluetooth built-in, connect your external Bluetooth adapter and follow the device set up procedures.
4. Within your computer Bluetooth settings, add and search for new devices. The device name is "EDIFIER Esiena BT".
5. Select the "EDIFIER Esiena BT" device to pair/connect with. Once complete, the screen will display "Bluetooth Connected".
6. Within your computer sound preferences, select the external speaker device / "EDIFIER Esiena BT" as your sound output / audio source.
For specific details about Bluetooth setup and connectivity, please refer to the user manual for your computer.
Time & Alarm Setting
1. Press "ALARM TIME" key or "FUNC" key until "TIME SETTING" is displayed.
2. Press "SELECT" key to switch among 'hour – minute - month - day – year".
3. Press
or rotate the touch sensitive volume dial to adjust settings.
4. Press "SELECT" key to exit.
Note: 1. Press & hold "ALARM TIME" key to switch 12-hour / 24-hour time format.
2. The system will revert back to the default display screen if there is no operation for 2 minutes.
1. Press "ALARM TIME" key or "FUNC" key until "ALARM SETTING" is displayed.
2. Press "SELECT" key to select "alarm number – alarm on/off – alarm time – alarm source –
alarm volume".
3. Press
or rotate the touch sensitive volume dial to adjust settings.
4. Press "SELECT" key to exit.
Note: There are 5 available alarm settings available.
Operational guide
8
English
Publicidad
