Publicidad
Idiomas disponibles
Idiomas disponibles
9. What if there are problems?
Fault
The device does not switch on after
the cable is plugged in.
The device switches itself off after
the warming up phase, there are no
more displays.
The device switches itself off mid-
way through the process, and there
are no more displays.
No LED display
10. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its
useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.
11. Technical specifications
Model
Dimensions
Weight
Supply voltage
Output
Disinfection time
12. Warranty / Service
Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet
supplied.
Cause
No electricity
No water in the steriliser Unplug the device, allow it to cool
Too little water in the
steriliser
Mains plug not (prop-
erly) plugged in or faulty
device
BY 76
ø x H: ~ 235 x 330 mm
1260 g (including accessories)
220 - 240 V ~ / 50/60 Hz
500 watts
approx. 7 mins
13
Action
Check that the plug is properly plugged
in.
down, then fill it with 120 ml water and
start the programme as described in
the instructions.
Check that the mains plug is (properly)
plugged in. If there is still no display,
switch the device off, unplug it and
return the device to the retailer.
Publicidad
