osann Flux Isofix eXT Manual De Instrucciones página 22

EN
USING THE CHILD CAR SEAT
Installation aid top tether for size class 76-120 cm
• The acoustic installation aid for the top tether reminds you to install the top tether for the 76-
120 cm size category.
• The installation aid is located on the back of the child car seat. First insert two AAA batteries
(LR03, 1.5 V) into the battery compartment and set the switch to ON. The batteries are not
included in the scope of delivery.
• Each time the child gets into the car seat, pressure is applied to a special sensor on the seat
surface. This activates the installation aid; you can recognise that the system is active by the
welcome message. If insuffi cient pressure is registered on the sensor of the top tether, e.g. be-
cause it has not been installed or has become loose over time, the installation aid will alert you
with a warning that repeats several times until you have tightened the top tether and suffi cient
pressure is applied to the sensor of the top tether.
• The language of the installation aid can be changed using the four buttons A/B/C/D. To do this,
pressure must also be applied to the sensor on the seat. Several languages are set on each but-
ton. By pressing a button several times, the other languages located on the respective button
can be selected. A list of which languages can be found on which button can be found below.
• In the 100-150 cm size category, in which the child is secured with the car's 3-point belt, you
no longer need the acoustic installation aid, as the top tether is not used in this size category.
Please set the switch to OFF accordingly.
Battery
compartment
A
German
Dutch
Slovakian
Danish
Croatian
B
English
Spanish
Portuguese
Greek
Hungarian
- 22 -
C
French
Czech
Finnish
Swedish
Estonian
ON/OFF switch
Buttons for select-
ing the language
D
Italian
Polish
Russian
Romanian
Bulgarian
Lithuanian
Chinese