SOLAX Triple Power BMS Parallel Box-II G2 Manual De Instalación página 83

2
Connect with T-BAT-SYS-HV-3.0
Connect with a MC0600 (BMS) and 2 HV10230
battery modules:
Battery
module
2-1
Connect with a MC0600 (BMS) and 6 HV10230 battery modules:
Battery
module
2-3
Connect with a MC0600 (BMS) and 8 HV10230 battery modules:
Battery
module
2-4
Battery
module
2-3
* The recommended installation distance between the box and the battery group
(including slave group and master group) is 11.81-23.62 inches /300-600 mm,
and the distance between the modules is 9.84 inches/250.00 mm.
* It is supported to only connect the slave battery modules. It is not supported to only con-
nect the master battery modules.
* The number of modules connected at the master side and the slave
side should be consistent. At most four modules can be connected at one side.
80
inverter
BMS
Battery
module
1-1
Battery
module
2-1
Battery
module
2-2
*Wiring at the back
Battery
module
2-1
Battery
module
2-2
*Wiring at the back
Connect with a MC0600 (BMS) and 4 HV10230
battery modules:
Battery
module
2-1
Battery
module
2-2
inverter
BMS
Battery
module
1-1
Battery
module
1-2
*Wiring at the back
inverter
BMS
Battery
module
1-1
Battery
module
1-2
*Wiring at the back
inverter
BMS
Battery
module
1-1
Battery
module
1-2
Battery
module
1-3
Battery
module
1-4
Battery
module
1-3