Publicidad
Idiomas disponibles
Idiomas disponibles
USE INSTRUCTIONS
1. Flip the cover around the burner and open the gas cap.
2. Insert the gas cartridge.
3. Push the level of the gas cartridge holder to the right down.
4. Close the lid of the gas cartridge.
- The flat part of the lid must face down, the spill tray
and the pot support must face up.
- To open the cover, insert your finger into the
opening hole of the cover and pull up.
- Make sure the power knob is in off position and
cartridge lock lever be released.
- Place the gas cartridge.
- Position the ring groove facing upwards.
- Check that the spring is inside.
- Note: You will not be able to press down on the lock
gas cartridge if the pot holder is not looking up.
Make sure the stove is on a surface solid and firm,
non-flammable and away from materials
flammable before lighting the gas.
Publicidad
