Bissell SPOTBOT 2117A Guia Del Usuario página 11

Manual Cleaning
Check upholstery stuffing before cleaning. Colored stuffing may bleed through
the fabric when it becomes wet. Check manufacturer's tag before cleaning.
1
Remove the hose from the unit by
pressing the release button and pulling
outward on end of hose.
3
Select the Hose/Tool button on the
control panel to start the SpotBot®.
5
If the stain is still visible, repeat step 4 as necessary.
NOTE: In manual mode, the SpotBot® is equipped with a safety feature which will
shut the unit OFF after 30 minutes.
10
www.BISSELL.com
2
Remove the Tough Stain Tool from the
back of the unit, then attach it onto the
grip of the hose.
4
Press the Spray Trigger button to spray
the soiled area, then slowly move tool
back and forth over the area.
Release the trigger to suck up the dirty
solution. Work in small sections until the
area is clean.