Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance and Care
1
Press the STOP button to turn the unit OFF.
Unplug the Power Cord from the outlet.
Wrap Power Cord around the cord wrap.
3
If you were using your SpotBot® manually,
wrap the Vacuum Flex Hose around the
unit and secure the hose into the Hose
Connector on the front of the unit.
NOTICE: To reduce the risk of a leaking condition, do not store unit where
freezing may occur. Damage to internal components may result.
2
Empty and rinse the Dirty Water Tank
after each use. To remove the tank, lift
up the dirty tank latch and pull the tank
out. Dump out the dirty water and rinse.
Replace the tank into the unit for storage.
After using the automated feature on
SpotBot®, wipe the window and brushing
area with a soft cloth.
Tips for Storing
• If a significant amount of water and
solution remains in the clean tank,
your unit can be stored with liquid in
the clean tank. However, if you have
added Oxy Boost into the clean
tank, it cannot be stored in the unit
and should be emptied and rinsed.
• Keep your machine clean and clean
out the black valve periodically
inside of the Dirty Water Tank.
• Store machine in a protected, dry
area.
www.BISSELL.com
13
Publicidad
