Publicidad
Idiomas disponibles
Idiomas disponibles
LED FUNCTION OF CHARGER
LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER AND
BATTERY PACK:
Constant Green (A) with no battery installed = Power is ON.
Constant Green (A) + Constant Red (B) = Battery is charging.
Constant Green (A) + Constant Green (B) = Battery is fully charged.
Constant Green (A) + Alternately flashing Red and Green(B) =
Temperature Abnormality
Constant Green (A) + Red indicator light (B)flashing = Something is wrong with battery
LED FUNCTION OF BATTERY PACK - CHECKING BATTERY CAPACITY:
LED WILL BE LIGHTED TO INDICATE STATUS OF BATTERY PACK:
During charging, the three (3) LED lights will off. To check the status of the battery charge,press the
small button (C) which activates three LED lights to indicate the following:
3 LED lights on = Power capacity = Battery Fully Charged
2 LED lights on = Power capacity ≈ 25% - 80%
1 LED light on = Power capacity ≈ 5% - 25%
During use, pressing the button (C) will illuminate the lights showing how much charge is left on the
battery. The lights will automatically shut off immediately when button is released.
C ( Charge Status Button)
WARNING:
When servicing, use only identical replacement parts.
Use of any other part may create a hazard or cause
product damage.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc. come
in contact with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
OPERATION
3 LED lights
MAINTENANCE
Battery Pack
Battery Pack
DO NOT abuse power tools. Abusive practices can
damage tools as well as the workplace.
WARNING:
Do not attempt to modify or create accessories not
recommended for use with this charger. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
Page 5
A
Charger
B
Publicidad
