Linea 2000 DOMO DO2520 Manual De Instrucciones página 35

Idiomas disponibles

PARTS

Safety interlock system

Observation window

Turntable shaft

Turntable ring assembly

Glass turntable

Control panel

Protection cover wave guide -

never remove this cover!

BEFORE THE FIRST USE

TURNTABLE INSTALLATION

First place the turntable ring in the middle of the microwave oven.

Place the turntable on the ring. Make sure that the middle of the

turntable fits into the turntable shaft.

CAUTION:

Never place the glass tray upside down. The glass tray should never

be restricted.

Both glass tray and turntable ring assembly must always be used during cooking.

All food and containers should be placed onto the glass turntable during cooking at all times.

If the glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized service

center. Or you can order the accessories in our webshop: webshop.domo-elektro.be

INSTALLATION

Remove all packaging material and accessories.

Check the oven for any damage, such as dents or a damaged door. Do not use the oven if it is

damaged. Remove the protective film around the machine, this is applied to avoid scratches.

Choose a place to install the

microwave, where there is sufficient

open space for the air intake and

exhaust.

The microwave oven must stand at

least 85 cm high.

Make sure that the left, right and back

side are at least 20 cm from the wall or

cupboard. One side of the microwave

oven must be completely exposed. The

open space above the microwave must

be at least 30 cm.

www.domo-elektro.be

DO2520