Hilti PC 2-22 Manual De Instrucciones Original página 26

3.5.2 Indicators showing the battery's state of health
To check the battery's state of health, press the release button and hold it down for longer than three
seconds. The system does not detect a potential malfunction of the battery due to misuse, for example
battery dropped or pierced, external heat damage, etc.
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
3.6 Settings (spray nozzle)
Symbol Function
Flat jet
Sprinkler
Turbo blaster
Spot jet
4 Technical data
4.1 Product properties
Weight
IP code
Nominal pressure
Permissible pressure
Water connection
Maximum inflow temperature
Maximum inflow pressure
Nominal flow rate (water)
Maximum flow rate (water)
Maximum suction head (only with hose fully filled)
Ambient temperature for operation
Storage temperature
4.2 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
20 English
Meaning
The battery can remain in use.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
Application description
Cleaning to remove medium soiling
Area cleaning to remove medium soiling
Area cleaning to remove severe soiling
Spot cleaning to remove severe soiling
PC 2-22
2.1 kg
IP X5 (Protection against water jets
from all directions)
40 bar ±3 bar
6 MPa
1⁄2" water hose / coupling
40 ℃
0.6 MPa
2.2 ℓ/min
4.5 ℓ/min
4 m
0 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these operating
instructions
−17 ℃ ... 60 ℃
2404922
*2404922*