Publicidad
Idiomas disponibles
Idiomas disponibles
SECTION 5 OPERATING YOUR PORTABLE AIR CONDITIONER
5.1 CONTROL PANEL AND OPERATING FUNCTIONS
If the unit is turned off during operation please wait at least
1)
On/Off Button: Use to Start or Stop the unit.
2)
Operation Mode Selection Button: Use to select the operation mode:
Auto Mode, Fan-Only Mode, Soft-Dry Mode, and Cooling Mode.
3)
Fan Speed Selection Button: Use to Select the fan speed:
High speed or Low speed.
4)
"Up" or
"Down": Temperature or Time Changing Button: Use these two buttons to
set to your desired temperature. The temperature unit can be on Fahrenheit or Centigrade. Press the
ON/OFF Button for more than 20 seconds, then release. The temperature unit will be changed from
Fahrenheit to Centigrade or vice versa. During the timer set-up, these buttons are also used to
change the time.
5)
Timer Setting or Cancel Button: Use to set or cancel TIMER-ON or TIMER-OFF timer. When
the unit is on, the unit can be set with Timer-OFF. When the unit is off, the unit can be set with
Timer-ON.
WARNING
three minutes before starting it again.
12
Figure 12
Publicidad
