Publicidad
Idiomas disponibles
Idiomas disponibles
• The LED display will show "bLUE".
• Using the controls on your Bluetooth device, scan for and select "PT989B+" in your
Bluetooth settings to pair.
• When successfully paired, a voice will announce the connection.
• Use the controls on the connected device to select and begin playing audio. Audio pla-
yed through the connected Bluetooth device will now be heard through the speaker. Use
the controls on the speaker or the connected device to play, pause, and adjust volume.
• Long press Play/pause button to disconnect the Bluetooth
3. USB MODE
• Load a USB drive into the USB Media port
• The Speaker will automatically enter into USB play mode.
• Use the controls on the speaker to select and play audio from the connected drive.
4. AUDIO IN
• Connect an external device (Smartphone, DVD Player, CD Player, MP3 Player, Digital
Receiver, etc.) to the Auxiliary AUDIO INPUT located on the top of the control panel, using
the RCA cable.
• Press the MODE key until the AUX mode.
• Start playback from the external device.
• The volume adjustment can be done by the external device and also by its amplified box.
5. TF CARD MODE
• Insert a TF card , TF card mode will start automatically
• In order for the speaker to recognize the song, these should be MP3 or WAV format.
• Press PLAY/PAUSE button to play or pause the music.
• Press NEXT/PREVIOUS button to go to NEXT/PREVIOUS song
6. FM RADIO
• Press MODE button to switch to FM mode, the display will show the station frequency.
• Press PLAY/PAUSE to enter into automatic FM channel searching
• Press NEXT button to go to the next frequency
• Press PREVIOUS to go back to previous frequency
7. MIC IN INPUT (WIRED MICROPHONE)
• Connect the wired microphone to the MIC IN 1 or MIC IN 2 jack located on the
top control panel of your amplified box.
• Adjust the volume level using the MIC VOL button
Publicidad
