Axis Communications W800 Guia De Instalacion página 3

Read this first
Read through this Installation Guide carefully
before installing the product. Keep the
Installation Guide for future reference.
Legal considerations
Video and audio surveillance can be regulated
by laws that vary from country to country.
Check the laws in your local region before using
this product for surveillance purposes.
Liability
Every care has been taken in the preparation of
this document. Please inform your local Axis
office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible
for any technical or typographical errors and
reserves the right to make changes to the
product and manuals without prior notice. Axis
Communications AB makes no warranty of any
kind with regard to the material contained
within this document, including, but not limited
to, the implied warranties of merchantability
and fitness for a particular purpose. Axis
Communications AB shall not be liable nor
responsible for incidental or consequential
damages in connection with the furnishing,
performance or use of this material. This
product is only to be used for its intended
purpose.
Intellectual property rights
Axis AB has intellectual property rights
relating to technology embodied in the product
described in this document. In particular,
and without limitation, these intellectual
property rights may include one or more of
the patents listed at axis.com/patent and one
or more additional patents or pending patent
applications in the US and other countries.
This product contains licensed third-party
software. See the menu item "About" in the
product's user interface for more information.
This product contains source code copyright
Apple Computer, Inc., under the terms
of Apple Public Source License 2.0 (see
opensource.apple.com/apsl). The source code is
available from developer.apple.com/bonjour/.
Equipment modifications
This equipment must be installed and used
in strict accordance with the instructions
given in the user documentation. This
equipment contains no user-serviceable
components. Unauthorized equipment changes
or modifications will invalidate all applicable
regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS and VAPIX are
registered trademarks or trademark applications
of Axis AB in various jurisdictions. All other
company names and products are trademarks
or registered trademarks of their respective
companies.
Apple, Apache, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla, Real, SMPTE,
QuickTime, UNIX, Windows, and WWW are
registered trademarks of the respective holders.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of
Oracle and/or its affiliates. The UPnP Word
Mark and UPnP Logo are trademarks of Open
Connectivity Foundation, Inc. in the United
States or other countries.
Regulatory information
Europe
This product complies with the applicable
CE marking directives and harmonized
standards:
•
Electromagnetic Compatibility
(EMC) Directive 2014/30/EU. See
Electromagnetic compatibility (EMC) on
page 2 .
•
Low Voltage Directive (LVD) 2014/35/EU.
See Safety on page 3 .
•
Restriction of Hazardous Substances
(RoHS) Directive 2011/65/EU and
2015/863, including any amendments,
updates or replacements. See Disposal
and recycling on page 3 .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB.
See Contact information on page 4 .
Electromagnetic compatibility
(EMC)
This equipment has been designed and tested to
fulfill applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in
its intended environment.
•
Immunity to electrical and
electromagnetic phenomena when
installed according to the instructions
and used in its intended environment.
USA
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
This equipment has been tested using an
unshielded network cable (UTP) and found to
comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules.