Publicidad
Idiomas disponibles
Idiomas disponibles
USE
1. Completely unwind the power cord.
2. Pull out the stopper and fill the water tank up to the MAX
mark.
3. If you want to use one of the brushes, attach it now.
a. The textile brush improves the result with thick, firm and
heavy fabrics such as coats and jackets. ATTENTION: Do
not use on fine textiles, can cause damage.
b. The lint brush is ideal for removing lint, hair or other
impurities from textiles.
4. Insert the power plug into the socket and press the power
button.
5. When the control lamp stops flashing, the operating
temperature has been reached.
6. Press the power button again to select the eco or normal
steam mode.
7. Press the steam trigger to start the steam output. You can
activate continuous operation with the caps lock key.
8. Work the textiles until the desired result is achieved. The
textiles can get slightly damp during steam ironing. Let the
fabrics dry completely before putting them in the closet or
putting them on.
9. When the water tank is empty, switch off the device by
pressing the power button for 2 seconds, pull the plug and
refill the tank.
AFTER USE & CLEANING
● Press the power button for 2 seconds to switch off the device.
● Pull the power plug out of the socket.
● Let the device cool down completely.
● Empty the water tank to avoid deposits.
● Wipe the device with a damp cloth. Do not use harsh
chemicals or detergents. Never immerse the device in water.
● Remove lint from the brush heads.
14
Publicidad
