ISE SY-1801 Manual De Usuario página 9

INSTALLATION INSTRUCTION
Attention: Make sure all screws and nuts are tightened before Exercise
Figure. 1
1.Use b-bolt M8x70 x8 to fix and connect 1- Handrail Frame x1 , 2- Support Stand x2,
3-40 reinforcing pieces x2 and 4-U shape Frame x2 with A-spanner 10x13x1 and B-5#
cross wrench x1, as shown in Figure 1.
EN
Figure. 2
2.First, stick the installation component of the previous step on the wall and keep it in a
horizontal state. Mark the position of installing a-expansion screws x6 on the wall with a
marking pen. Use Ø 12 drilling bit to drill 6 holes at the mark with a depth of at least
75mm. Align the product with the hole position, connect and fix the a-expansion screws
x6 on the wall with A-spanner 10x13 x1, as shown in Figure. 2.
3