Publicidad
2. HDR: On / Off - This function allows the device to dynamically change the
value of underexposed and overexposed areas, making underexposed
elements clearer in the recordings.
3. Exposure: allows you to adjust the recording brightness to suit the environ-
ment - Allows you to adjust the amount of light that reaches the camera
sensor in video mode.
4. Audio recording: On / Off
5. Date stamp: On / Off - Allows you to enable/disable the display of the date
and time at which the video was taken.
6. G-Sensor: Off / Low / Medium / High - Gravity sensor sensitivity. This
function makes the camera automatically take a video recording when
it detects a shock (caused, for example, by a bump) and protects it from
being overwritten. It is recommended that the G - SENSOR option is set to
minimum to avoid protecting unnecessary footage and thus losing space on
the memory card.
7. Parking mode: On / Off - Allows you to enable/disable parking mode. This
function makes the camera automatically start up and take a short video
recording when a shock is detected (caused, for example, by a car park colli-
sion). Recordings made in this mode are protected from being overwritten
8. Motion detection: On / Off - This mode starts recording when the camera
detects movement (e.g. a person in front of a vehicle). The function only
works when the camera is not recording and is connected to power. The
recordings are not protected against overwriting.
9. GPS information: information on GPS position
Second tab: (single pressing of the M button or selection list)
1. Screen saver: Off / 30s / 1min / 2min
2. Automatic power off: Off / 1 min / 3 min / 5 min
3. Frequency: 50Hz / 60Hz - recommended setting: 50Hz.
4. Sound in the menu: On / Off
5. Language - choice of language (Polish, German, French, Czech, Hungarian,
Romanian, English)
6. Date/time settings - Allows you to set the current date and time in the
device's memory. This data will be displayed on recordings and photos if the
DATE STEMPEL function is enabled.
7. SD format - formatting the SD memory card
8. Default settings - restore device default settings
9. Version - software version
06. APPLICATION FOR PLAYBACK OF RECORDINGS AND ROUTES
For playback of recordings, tracking and vehicle speed, we suggest using the
DVPlayer application, which can be downloaded from: https://www.dvplayer.
14
net/. To be able to register the application free of charge, use the activation
code added to the purchased video recorder. The activation code is included in
the package, on a separate card.
07. PRECAUTIONS
1. Do not disassemble the camera yourself or interfere with its construction. In
the event of a malfunction, contact the service department.
2. Use only original accessories.
3. Only use the original charger supplied. The use of any other power supply
may adversely affect the performance of the device, battery or GPS module.
4. The device may not be used in contravention of the laws of your country
or region.
5. Permissible operating temperatures are 0-35 °C, storage: +5 to +45 °C
6. Do not subject the device to damage or impacts.
7. Take care of the cleanliness of the product, especially the lens. Do not use
detergents or chemicals when cleaning.
8. Clean only when the unit is unplugged.
9. Keep the device out of the reach of children.
10. Do not expose the device to very high temperatures or fire.
11. If you smell burnt plastic or electronics from the camera, unplug the unit as
soon as possible and contact service.
08. FAQ
1. Device does not switch on, screen flashes
Before starting up, charge the unit's battery and check the connection in the
cigarette lighter socket.
2. The device does not switch on/off automatically
The reason for this behaviour may be the constant power supply in the cigarette
lighter socket.
3. The camera stops recording / does not overwrite recordings
Check: G-SENSOR - a function by which recordings with recorded overloads (e.g.
Uneven pavement, braking, driving off a kerb or over a speed bump, etc.) Are
protected from being overwritten. If you use this function, you must periodically
format the memory card on your computer and then on the camera. Ultimately,
each file on the data carrier will be protected from being overwritten and the
device will not be able to record a further route - it will not record in a loop. We
suggest setting the sensor according to your driving style and road conditions.
You can also disable the option completely, in which case each oldest file will
be overwritten and the card will not need to be formatted periodically. After
adjusting the function, remember to format the memory card.
4. The camera turns on and off
15
Publicidad
