Models: 2322 • 2322CA
❶ ❶ Hang the shelf basket on the accessory rail�
STEP 10
❷ ❷ Push the basket in to secure�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
Hang the grease cup in the slot at the back of the
STEP 12
griddle body�
With the help of another person, place the griddle top and hood on
the main body by aligning the 4 pins to the holes of the body�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
BLACKSTONEPRODUCTS.COM/SUPPORT
Use the two (2) pre-installed M6x16 screws to install the
STEP 11
hood handle and handle bezels to the griddle hood�
❶ ❶
❷ ❷
Push down on the shelf tabs to
unlock the shelf extender�
slide out the extender until
it locks�
Push down on the shelf tabs to unlock
Push down on the shelf tabs to unlock
and slide back in.
and slide back in.
ASSEMBLY GUIDE
| OWNER'S MANUAL
❶ ❶
❷ ❷
09