Publicidad
Idiomas disponibles
Idiomas disponibles
1.3.3
On the machine
On the machine (See Figure 1) you will find the following warning symbols in black on a
yellow background.
HOT OBJECTS (1)
DANGER OF GETTING BURN WOUNDS.
MAKE SURE NOT TO TOUCH THE UPPER MAIN ROLLER WHEN
HEATED.
This symbol is placed on the inside side panel on both sides of the machine, just above
the upper main roller, visible from the front and rear side. Also on the image guide at the
input side of the nip and on the output nip safety bar (1).
ROTATING PARTS (2)
DANGER OF GETTING INJURED BY ROTATING PARTS.
MAKE SURE THAT THESE ROTATING PARTS DO NOT CATCH YOUR
FINGERS, CLOTHING, HAIR, ETC.
This symbol is placed on in-feed table arms, on the cabinets just above and below the
output table and on the pull roller safety bar (2).
ESD SHOCK (3)
DANGER OF GETTING AN ELECTRIC SHOCK CAUSED BY
ELECTROSTATIC CHARGE BUILD-UP IN THIS AREA.
This symbol is placed on those places where electrostatic charges can be build-up. The
output side of the machine and the output material are most likely building up charges.
Therefore ESD-symbols are placed on the output nip and pull roller safety bars (3)
Figure 1: Warning symbol locations.
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
10
Toll Free: 1-800-944-4573
Local: 503-640-5920
User Manual 62Pro
Publicidad
