Publicidad
Idiomas disponibles
Idiomas disponibles
2. Take the support and rotating shaft out assembly and lock them using
two screws.
3. Lock the bracket and base with a screw.
4. Stick the assembled stand into the corresponding slot of the back
shell, gently press the bracket to lock it into the lock, then hold the middle
of the bracket, gently lift the body twice, without loosening your grip, to
make sure that it's locked.
5. After assembly, simply lift the monitor upright with your hands.
Note: During the set-up of the monitor, do not press the liquid crystal
screen your hands to avoid damage to the screen.
7
Publicidad
