Hitachi RAK-18PSC Manual De Instrucciones página 24

LEAVE HOME(LH) OPERATION
Prevent the room temperature from falling too much by setting temperature 10°C automatically when no one is at home.
This operation is able to operate by "Continuous operation" or "Day timer operation". Please use "Day timer operation" to set
the number of days up to 99 days.
Continuous operation
Day timer operation
NOTE
●
After reaching the set number of operation days for Leave Home or by pressing the (Leave Home) button again,
the unit will operate in previous mode.
●
During Leave Home operation, fan speed and horizontal air deflector position cannot be changed.
●
By pressing (Leave Home) button, implementation of Weekly Timer or Once Timer is cancelled.
●
In case of power supply shut down, after autorestart, all setting for number of days operation will be reset and unit
shall be in continuous operation.
POWERFUL, SILENT and ECO operations are not applicable during Leave Home operation.
■ To start LEAVE HOME operation
Option 1. Continuous operation.
● Press
Room temperature is set at 10°C and heating operation starts.
" ", " ", "
Option 2. Day timer operation.
● Press
Room temperature is set at 10°C and heating operation starts.
" ", " ", "
●
Set number of operation days (1 to 99 days), if needed.
1
Press (TIME) button to select number of days.
Number of days blink.
* Press "
days ..... 98 days, 99 days, 1 day and so on.
* Press "
days, 97 days .... 3 days, 2 days, 1 day, 99 days and so on.
* Number of day is counted when clock indicates 0:00.
●
Press
days. Display for number of operation days will stop blinking.
●
Press
days or to have continuous operation.
■
To cancel LEAVE HOME operation
●
Press (START/STOP) button. Or
●
Press (LEAVE HOME) button again.
Return to previous operation mode. Or
●
Change to other operation mode by pressing
- 19 -
(LEAVE HOME) button during stop or operation.
", " " is displayed on the LCD.
(LEAVE HOME) button during stop or operation.
", " " is displayed on the LCD.
(UP)" to set number of days from 1 day, 2 days, 3
(DOWN)" to set number of days from 99 days, 98
(SEND) button to confirm number of operation
(CANCEL) button to reset number of operation
(MODE) button.