Publicidad
Idiomas disponibles
Idiomas disponibles
–
2
Attach both springs
to spring tensioner
–
8
Mount spring tensioner
tighten all the way.
–
Remove the motorcycle from the lifting gear at the rear (see owner's manual).
8
(included).
9
using screw
(included) and washer
Raising the vehicle with the center stand
–
Stand to the left of the vehicle.
–
Hold the handlebar with your left hand and push the cen-
ter stand onto the ground with your right foot.
–
Put your entire weight on subframe arm
stand while pulling the vehicle up at the left grab handle
until the center stand folds out all the way.
500971-01
Removing the vehicle from the center stand
–
Unlock the steering and move the vehicle forward with
both hands on the handlebar.
–
While the vehicle tips off the center stand, actuate the
front brake to stop the vehicle from rolling away.
–
Check that the center stand is folded all the way up.
500970-01
503041-01
bk
(included) to the center stand and
1
of the center
ASSEMBLY 5
13
Publicidad
