Sharp AN-65AG2 Manual De Manejo página 16

2
Tidying cables, and attaching the TV installation fi xtures and the
mounting brackets (for TV) to the LCD color TV
Use 4 screws (B) (M8, 14 mm) to fi rmly attach the TV installation fi xtures and the mounting
brackets (for TV) to the back of the LCD color TV.
When doing so, be sure to attach the TV installation fi xtures and the mounting brackets (for
TV) in the confi guration and direction indicated below.
The attachment position of the mounting brackets (for TV) differs according to LCD color TV
model. (See table below.)
Connect the cables, attach the cover
included with the LCD color TV
and reattach the terminal cover to
the back of the LCD color TV, then
attach the TV installation fi xtures.
Installing the LCD Color TV on the Wall
• Be sure to use two or more people to mount the LCD color TV to the based brackets.
• Be sure to attach the TV to the brackets correctly. If you do not attach them correctly, the
LCD color TV may fall and cause injury.
Mounting the LCD color TV on the wall and fastening screws
Insert the TV installation fi xture hooks into the 4 triangular holes on based bracket A, and secure the
top of the brackets using the 2 screws (A) (M5, 6 mm).
Be sure to check that
the hooks are attached
correctly by pulling the
LCD color TV towards you.
E-6
TV installation fi xtures
Wall
LCD color TV
Based brackets
Screws (B)
(M8, 14 mm)
Mounting
bracket (for TV)
Washer (E)
Stamp on mounting
Model
bracket (for TV)
LC-65XS1
LC-65XS1U
LC-65XS1E
LC-65XS1RU
LC-65XS1X
LC-65XS1M
LCD-65XS1A
Screws (A)
M5. 6 mm x 2 screws
b
b
b
b
b
b
b