Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 19
WARNING
Serious or fatal crushing injuries
can occur from furnitur
To prevent tip over.
* Install tip over restraint provided.
* Pace heaviest items in the lowest
drawers.
* Unless specifically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tip over restraints may only
reduce, but not eliminate the risk
of tipover
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW
THESE INSTRUCTIONS TO INSTALL THE TIPPING RESTRAINT KIT PROVIDED WITH THIS
PRODUCT.
OPTION 1: Attachment into a wall stud (preferred method).
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm)
through the safety bracket into the stud. Drive the long screw in (11) through the safety bracket into
the wall stud.
OPTION 2: Attachment into drywall.
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move
your unit aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor in (12) into
the hole until it is flush.
safety bracket into the wall anchor.
ameriwoodhome.com
11
Move the furniture to its final position.
× 1
Drive the long screw in (11) through the
For Masonry, Concrete, or other wall
materials:
Consult your local hardware store for
appropriate anchors to securely
attach the safety bracket.
hole
wallboard
stud
Publicidad
