Publicidad
Idiomas disponibles
Idiomas disponibles
26 OPERATION
• If this icon is displayed on the screen, be careful
because the ceramic glass surface is hot.
- Failure to take care may result in burns or
injuries.
• After you turn off the cooking zone, the icon is
displayed continuously until the ceramic glass
surface cools down.
- If the temperature near the product is high, it
may take longer for the ceramic glass surface
to cool down.
• Even after the indicator light has turned off, be
careful because the surface may still be hot.
Changing Cooktop Settings
Control Lock
The Control Lock feature automatically prevents
cooktop controls from being turned on. It does not
disable the timer.
• If Control Lock is turned on, all cooktop
functions are disabled except the POWER and
Control Lock buttons.
Lock
1
Press and hold Control Lock for 3 seconds.
The Control Lock button lights up.
2
All buttons are disabled except for the POWER
and Control Lock buttons.
NOTE
• When Control Lock is in operation, if you press
another key, the Control Lock button blinks for
5 seconds. This occurs even if the product is
turned off.
• Even if you turn the product off and on again,
Control Lock is maintained.
Unlock
Press and hold Control Lock for 3 seconds to turn
off the lock and unlock all buttons.
Wi-Fi
The Wi-Fi button, when used with the LG ThinQ
app, allows the induction to connect to a home Wi-
Fi network. Refer to Smart Functions for
information on the initial setup of the app.
Setting Up Wi-Fi
The Wi-Fi button shows the status of the cooktop's
network connection. The button illuminates when
the cooktop is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to
connect to the network. The button blinks while
the connection is being made and then turns on
once the connection is successfully made.
To turn off the Wi-Fi, press and hold the Wi-Fi
button again for 3 seconds.
Before Using the Cooktop
Before using the cooktop for the first time, clean it
thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will help
protect the ceramic surface and make future
cleanup easier.
CAUTION
• Never use abrasive scrubbing pads or cleaners.
They can cause permanent damage to the
cooktop surface.
Using the Cooktop
First Operation
When you first connect the electrical supply to the
cooktop, the "
" indicator will blink for 60 seconds.
H
This is normal and does not indicate a malfunction.
Publicidad
