ivory C31K Instrucciones De Uso página 54

-replacing the O-rings
(only on models C31K / C30LK / C31LK / C30LW / C30LS / C30LB)
HINT! Coupling C30LN does not have any O-rings. The O-rings
are located in the handpiece fitting.
Replace the O-rings if you notice any water leaks between the coupling
and the handpiece.
-replacing the LED
- Models: MOD. C30LK / C30LK / C31LK / C30LS
1) Unscrew the cap anti-clockwise to remove it.
52
Eng
1) Squeeze
between your fingers to remove it.
2) Fit the new O-ring in the correct
seat.
the old O-ring