Publicidad
Idiomas disponibles
Idiomas disponibles
1. Make sure that the installation site will not allow the rotating fan blades to come into contact with
any object and that there is a minimum clearance of 150mm (6") from the blade tip to the wall or
ceiling. Please note that the bigger this clearance is the better the airflow from your fan will be.
DO NOT use outdoors. Installing the fan in a position where it could be exposed to water or moisture
is dangerous.
If the location you have chosen does not have a suitable support beam capable of supporting 45Kg,
install a brace 2" x 4" between the ceiling joists as a support medium.
Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a load of
at least 45Kg, with the two long fixing screws provided. Ensure that at least 30mm of the screw is
threaded into the support.
2. Place the assembled fan into the bracket and make the wiring connection
3. Place the canopy over the bracket, align the canopy holes with the screws and tighten.
ELECTRICAL CONNECTIONS
INSTALLING GLOBES
The ceiling fan can used with E27 globe Max 1x60W. No included with the selling pack.
Ensure the selected globes do not touch each other, the diffuser glass, or the lamp holder plate.
Publicidad
