Publicidad
Idiomas disponibles
Idiomas disponibles
REVERSE SWITCH
The "Summer / Winter" reverse switch should be in the forward position to make the fan rotate in a
counter-clockwise direction during summer and air fresh moves down. In winter, this switch should
be reversed and air fresh moves up, so that the blades now move in a clockwise direction. Check the
label on Reverse Switch.
CARE & CLEANING
Periodic cleaning of your ceiling fan is the only maintenance required.
Use a soft brush or lint free cloth to avoid scratching the finish. Please turn off electricity when you do
so.
Do not use water when cleaning your ceiling fan. It could damage the motor or the plastic blades and
create the possibility of an electrical shock.
The motor has a permanently lubricated ball bearing, and as such is maintenance free.
FUNCTIONS TRANSMITTER
When you would like to operate ceiling fan by remote controller, you should the
transmitter pointing to I. R. Sensor
OFF: Turn off ceiling fan.
HI: Turn on ceiling fan at high speed.
MED: Turn on ceiling fan at medium speed.
LOW: Turn on ceiling fan at low speed.
LIGHT: ON/OFF-Press and release immediately to turn on or off the light
1H: Setting up that the ceiling fan will off power after 1 hours automatically
2H: Setting up that the ceiling fan will off power after 2 hours automatically
4H: Setting up that the ceiling fan will off power after 4 hours automatically
INSTALLATION INSTRUCTIONS
CAUTION: Incorrect wire connection would damage this receiver.
1. Ceiling fan must be set at High speed by pulling the "Pull Switch" after installation.
2. For fans that are not drop rod style (i.e. Flush Mount styles) the appropriate conversion kit should
be used. The fan should be installed and hanging from the ceiling.
3. Make the wiring connection as shown in Fig.1.1 IR senor must be stuck outside canopy.
4. Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The
canopy comes up to cover the receiver and bracket.
Publicidad
