Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Return the nosepiece with press force to its original posi-
tion after the jammed nail/staple is removed.
3.
Reload the staples/nails, close the magazine and insert
the battery pack onto the tool.
MAINTENANCE
•
Always be sure that the tool is switched off and the bat-
tery pack is removed from the tool before attempting to
perform inspection or maintenance.
•
Regularly clean the tool's air vents with compressed dry
air. Do not attempt to clean by inserting pointed objects
through openings.
•
Do not use cleaning agents to clean the plastic parts of
the tool, a mild detergent on a damp cloth is recommen-
ded instead.
•
Dispose the recyclable li-ion batteries properly.
TECHNICAL SPECIFICATIONS
•
Voltage: 20V, 2000mAh
•
Battery Capacity: 2Ah/4Ah/6Ah (Li-ion) (not included)
•
Average firing speed: 60 nails/staples per min
•
Max. firing speed: 100 nails/staples per min
•
Max. magazine capacity: holds up to 100 nails/staples
•
Max. length of nails: 50mm (18 Gauge Brad Nails)
•
Max. length of staples: 40mm (18 Gauge narrow crown
light duty staples)
•
Max. nail cross section width: 1.25mm
•
Max. nail cross section thickness: 1.05mm
•
Max. staples crown: 6mm
•
Max. staple nail cross section width: 1.2mm
•
Max. staple nail cross section thickness: 1mm
•
Run time:
•
2Ah battery – 420 staples/nails per charge
•
4Ah battery – 800 staples/nails per charge
•
6Ah battery – 1200 staples/nails per charge
•
Dimensions: 292x259x94mm
•
Weight: 2.8kgs
PARTS LIST
1.
Safety contact pin
2.
Magazine
3.
Led light indicator
4.
Drive shift knob
5.
Trigger switch
6.
LED light switch
7.
Battery release button
8.
Battery (not included)
9.
Belt hook
10.
Magazine cover release button
11.
LED light
12.
Depth adjustment wheel
13.
Charger (not included)
· 8 ·
REF. 60037
Publicidad
