Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (continued)
Blowing
Feature
Your vac features a blowing port. It can
blow sawdust and other debris. Follow the
steps below to use your vac as a blower.
1. Locate blowing port of your vac.
I A
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a blower.
WARNING: To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.
CAUTION: Wear a dust mask if
blowing creates dust which might be
inhaled.
Blower Nozzle Stock No. 9-16933 is
recommended
for blowing debris.
Metal
andle
_g Hose End
Port
Handle
A
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the vac/blower for
extended hours or when using it in a
noisy area.
2. Insert the locking end of the "Pos-I-
Lock" hose into the blowing port of the
vac. The hose should snap into place.
To remove the hose from the vac, press
the release button in the hose
assembly and pull the hose out of the
vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose, then place the
car nozzle on the wand.
4. Turn vac on and you are ready to use
your vac as a blower.
Sears recommended
accessories are
available at Sears retail stores. The Sears
Car Nozzle
(Optional)
Swivel End
Of Hose
Extension
Wand (Optiona0
12
Publicidad
