Omnilux Clear Guia Del Usuario página 2

English
Users of this device can obtain benefit from using it only if they read
and comprehend all information in the user guide.
You must follow all the instructions in the User Guide.
Please feel free to contact us if you have any comments about the Omnilux Clear™
device or this User Guide.
GlobalMed Technologies Co.
163 Camino Dorado Suite B
Napa, CA 94558
Tel: +1-707-224-0200
www.omniluxled.com
1912
The information in this document is proprietary to I-SMART Development Ltd,
and supplied on the understanding that it shall be kept confidential to recipients
and that it shall not be altered, reproduced and/or used for commercial purposes
without the written consent of I-SMART Developments Ltd.
Med-Di-Dia Limited Galway Technology Centre Mervue
Business Park, Galway, Ireland
Emergo Australia, Level 20 Tower II, Darling Park
201 Sussex Street, Sydney, NSW 2000, Australia
Contents
Section Header
Introduction
Who should use Omnilux Clear?
Device description
Intended Purpose
When should Omnilux Clear NOT be used?
Contraindications, Warning and Precautions
Known Side Effects and Benefits
First time Setup
Unpacking and Charging your Omnilux Clear
Connecting the Omnilux Clear to the Controller
Sensitization Test
Using Omnilux Clear
Treatment Recommendations
Section number
2
Wearing the Omnilux Clear
Carrying out a Treatment
Care and Maintenance
Cleaning the Omnilux Clear Device
Disposal
Troubleshooting
Labelling
Recycling
Technical specifications
Explanation of symbols
Warranty
1.0. Introduction
Thank you for choosing Omnilux Clear.
The Omnilux Clear LED mask is intended to emit light in the blue and red region.
of the light spectrum and is indicated for the treatment of mild to moderate acne
vulgaris of the face.
(See "Who should use Omnilux Clear" section 2 on page 4, for more information
about how to tell if you have mild to moderate acne and if the Omnilux Clear is
right for you).
Users of this device can obtain benefit from using it only if they read and
comprehend all information in the User Guide.
You must follow all the instructions in the User Guide.
Please feel free to contact us if you have any commented about Omnilux Clear
or this User Guide.
Before using the Omnilux Clear you must carry out a sensitization test
1.0
and wait 6 hours. (See section 6.3).
2.0
3.0
3.1
4.0
5.0
6.0
6.1
6.2
6.3
7.0
7.1
3
7.2
7.3
8.0
8.1
8.2
8.3
9.0
10.0
11.0
12.0
13.0