HONEY JOY HW65906 Manual Del Usuario página 3

EN
Chair Assembly Instructions
1
Insert the chair bracket (B1) into the chair feet (B2).
2
Insert the washers (A1) and screws (A2) into the bottom holes in
order as the picture shows, and then fix them with a wrench
(A10).
04
3
Position the seat support rail as the
arrow indicated.
4
Install the chair back tube (B3)
into the upper position of the
chair bracket and align the hole,
then insert the washers (A3) and
screws (A2) in order as the
picture shows, and then fix them
with a wrench.
Connect the chair back tube
(B4) and (B3) with the chair
connecting tube (B5), install
the chair back tube (B4) on the
completed bracket, insert the
washers (A3) and screws (A2)
in order as the picture shows,
and then fix them with a
wrench..
EN
05