Publicidad
Idiomas disponibles
Idiomas disponibles
Tips:
1) How to use the safety valve.
◎ Open the cap of valve;
◎ Insert the inflatable hose into the inlet to inflate and insert the cap of the
valve when the inflation is complete; see Figure 5
◎ Deflation: open the cap of valve and let the air out slowly from the
chamber.
2) How to use a rotated valve
◎ Open the cap of valve;Press the red point on the up position.
◎ Insert the inflatable hose into the air inlet and rotate it in place clockwise,
and cover the cap when the inflation is complete; see Figure 6
◎ Deflation: open the cap of valve, press the middle red point on the down
position, let the air slowly out from the chamber.
5
3.3 Use of lock sockets
Insert the key into the hole in the middle of the socket and open or lock it in
the direction of the switch shown in figure 8
8
10
6
7
3.4 Connecting the pump to the pool
Note: The power plug must be pull out before connecting the pump to the
pool.
◎ Connect the pump and pool by pipes according to the marks on outside
surface, see figure 9
9
◎ Assembling the filter cartridge
The filter cartridge is screwed to the water inlet wall of the pool and rotated
clockwise. See figure 10
◎ Fill the pool with water
A)
B)
Fill the water with water hose until the water reaches the printed water level
line on the inner wall of the pool.
Warning:
◎ Do not plug in during filling the water.Take care of the water hose to
prevent them from falling off to cause the water leakage.
◎ Please cover the pool well when you heat the water.
◎ Please make sure that the children use the pool under the supervision of
adults.
◎ When not in use, please cover the pool and lock the buckle to prevent
children from entering the pool.
10
C)
Water line
11
Publicidad
