Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING & MAINTENANCE
MAINTENANCE
ATTENTION: Careful and regular maintenance is important to insure long term efficient operation of this
appliance.
1.
Check the cleanliness of the Reflector and IR-Filament at least once a month. If necessary, apply
cleaning and maintenance instructions" to "see cleaning instructions below.
2.
The number of checks may be increased considering the amount of the dust in the environment.
3.
Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance.
In case of deformation, consult local service technical.
4.
Check the Power Cord and Plug visually while cleaning the appliance. In case of deformation,
consult to your technical service.
CLEANING
Regular and careful cleaning helps your infrared heater operate efficiently for many trouble-free years.
To clean your heater follow steps below:
1.
Unplug the power cord for your safety before cleaning your appliance.
2.
Make sure the heater is cool before continuing.
3.
To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use a mild
detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids
enter the heater).
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the heater.
This may cause damage or deterioration to the surface of the heater.
5.
DO NOT immerse the heater in water.
6.
Wait until the heater is completely dry before use.
RECYCLING
At the end of the electrical products useful life it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your
country.
21
Publicidad
