Publicidad
Idiomas disponibles
Idiomas disponibles
11. Make sure the blue plug of the jumper cable is plugged
fully into the jumper socket; otherwise, the blue plug could
melt.
12. Make sure the battery terminal are clean before starting,
and make sure the battery clamps are well connected. If the
battery terminals on the vehicle are dirty or corroded, the
output power of the unit will be lessened.
13. Do Not connect the two clamps together.
14. Do Not connect the jump starter's clamps to the battery
reversely while pressing the ''BOOST'' button to avoid
accident.
15. Only use this unit to start the vehicle when the battery
indicator is more than 2 bars.
16. Do Not keep the unit connected to the vehicle battery
after successfully starting the engine. Remove the product
from the vehicle battery after starting the engine. If not, it
could lead to damage.
17. Do Not recharge this product immediately after using it
to start the vehicle, please cool it down for 30 minutes
before charging.
18. Do Not allow the product to become wet and Do Not
immerse in water.
19. Do Not operate the product in explosive atmospheres,
such as in the presence of flammable liquids, gases, or dust.
13
Publicidad
