Gooloo TITAN GP4000 Instrucciones De Uso página 8

Solid red light: This indicates that the positive
and negative terminals are incorrectly
connected. Please reconnect them correctly,
and once the green light turns solid, proceed
with the emergency jump-start.
Flashing green light: This indicates that the
battery voltage is too low. Press the BOOST
button, and once the green light turns solid,
complete the jump-start within 30 seconds.
No red or green light: This may indicate that
the battery is completely damaged. Ensure the
positive and negative terminals are correctly
connected, then press the BOOST button.
Once the green light turns solid, complete the
jump-start within 30 seconds.
15V/10A DC Output (12-16.8V,150W Max)
●Cigarette Lighter Socket Output
Connect the 12V devices that need to be powered by
cigarette lighter socket.
●5.5*2.1mm DC Output
You can connect the 12V devices that need to be
powered by the 12V DC port. Please check if the devices
support 12V DC input ( the diameter of the DC port is
5.5*2.1mm) . If not, you will not be able to use the DC
output.
5