Publicidad
Idiomas disponibles
Idiomas disponibles
6 - Turning on and heating up
EN
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The
appliance is ready for use only after completion of this cycle.
DANGER OF BURNS!
During rinsing, a little hot water flows from the coffee
spouts.
To turn the appliance on, press the ON/OFF/stand-by
button (A7) (fig. 1). The message "HEATING UP... PLEASE
WAIT" is displayed.
When heating is complete, the message changes to
"RINSING";
The appliance is at temperature when the message
"MEDIUM CUP NORMAL TASTE" is displayed.
If no icon is pressed within about 2 minutes, the time (if set,
see the "Setting the clock" section) is displayed.
If the time has not been set, the appliance displays the last
functions set.
When any icon is pressed, "MEDIUM CUP NORMAL
TASTE" is displayed again. The appliance is ready to make
coffee again.
14
Publicidad
