Descargar Imprimir esta página

Fulgor Milano F7BC24 1 Serie Manual De Instalación, Uso Y Mantenimiento página 29

Ocultar thumbs Ver también para F7BC24 1 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

DISPLAYED MESSAGE
FILL TANK!
GROUND TOO FINE ADJUST MILL
AND alternating with PRESS OK
GROUND TOO FINE ADJUST MILL
AND
(alternating with)
PRESS OK
(then)
FILL TANK
EMPTY WASTE COFFEE CONTAINER The waste coffee container (A4) is
INSERT WASTE COFFEE CONTAINER After cleaning, the waste coffee
INSERT PRE-GROUND COFFEE
PLEASE DESCALE!
LESS COFFEE
FILL BEAN CONTAINER
INSERT BREWING UNIT
CLOSE DOOR
GENERAL ALARM!
POSSIBLE CAUSE
The water tank is empty or positioned
incorrectly.
The grinding is too fine and the coffee
is delivered too slowly.
The tank has been removed during
delivery.
too full or more than 3 days have
passed since you last made coffee
(this guarantees correct hygiene of the
machine).
container has not been replaced.
The "pre-ground coffee" function has
been selected without placing any pre-
ground coffee in the funnel.
The funnel (A21) is blocked.
The machine must be descaled.
Too much coffee has been used.
The coffee beans have run out.
The brewing unit has not been replaced
after cleaning.
The service door is open
The inside of the appliance is very
dirty.
20 - Displayed Messages
REMEDY
Fill the tank with water and/or insert it
correctly, pushing it as far as it will go.
Turn the grinding adjustment knob one
click clockwise towards "7".
Insert the tank and press the OK icon
(B9).
"HOT WATER PRESS OK" is displayed.
Press the OK icon (B9) again.
The appliance is once again ready for
use.
Empty the waste coffee container and
clean, then replace.
Important: when removing the drip
tray, the waste coffee container MUST
be emptied, even if it is not completely
full.
If this is not done, when you make the
next coffees, the waste coffee container
may fill up more than expected and
clog the machine.
Open the service door and insert the
waste coffee container.
Extract the appliance and place pre-
ground coffee in the funnel.
Empty the funnel with the help of a knife
as described in the section "Cleaning
the pre-ground coffee funnel".
The descaling procedure described in
the "Descaling" section needs to be
performed as soon as possible.
Select a milder taste or reduce the
quantity of pre-ground coffee, then
make the coffee again.
Fill bean container
Insert the brewing unit as described
in the section "Cleaning the brewing
unit".
Close the service door.
Clean the inside of the appliance
thoroughly, as described in the section
"Cleaning and maintenance".
If the message is still displayed after
cleaning, contact a customer services.
EN
27

Publicidad

loading

Este manual también es adecuado para:

F7bc24s1F7bc24b1