Tascam BD-MP1MKII Manual Del Usuario página 34

For video discs, first use the j/k cursor buttons to select
the number* of the title to be played in the title input field.
Then, use the ; cursor button to move to the chapter input
field, and use the j/k cursor buttons to select the num-
ber* of the chapter to be played.
o Use the CLEAR button to reset the input number to 0.
o Press the RETURN button to cancel the program and
close the Program page.
(The input content will be cleared.)
* Only values that exist in the disc content can be selected.
CD Screen
For audio discs, use the j/k cursor buttons to select the
number* of the track to be played in the track input field.
o Use the CLEAR button to reset the input number to 0.
o Press the RETURN button to cancel the program and
close the Program page.
(The input content will be cleared.)
* Only values that exist in the disc content can be selected.
3.
After inputting all the desired playback items, press the 7
button to start program playback.
NOTE
When the Program page is open, only the following buttons
can be used.
7, CLEAR, RETURN, cursor and number buttons
34
TASCAM BD-MP1MKII
Setting bookmarks
This unit can be used to set bookmarks to remember specific
places on video discs.
To create a bookmark, press the MARK/GREEN button at the
desired place during video playback.
o The internal memory can store a maximum of 12 bookmarks.
o The bookmark number, current title, chapter and time are
shown on the monitor.
Jumping to bookmarks
1.
Press and hold the MARK/GREEN button for 6 seconds.
Playback will pause, and available bookmarks will be shown
on the monitor.
2.
Use the l/; cursor buttons to move between bookmarks.
When a bookmark is selected, its number and the current
title, chapter and time are shown on the monitor.
Available bookmarks appear white, while unused book-
marks appear gray.
3.
Press the ENTER button to jump to the target bookmark.
Playback from that bookmark is possible.
To cancel this operation and return to ordinary playback,
press the MARK/GREEN button.
Deleting bookmarks
1.
Press and hold the MARK/GREEN button for 6 seconds.
Playback will pause, and available bookmarks will be shown
on the monitor.
2.
To delete the last created bookmark, press the CLEAR/
GREEN button.
3.
Press the MARK/GREEN button to close the bookmarks and
return to ordinary playback.
Adjusting the volume from the unit
To adjust the volume during playback, use the -/+ (VOLUME)
buttons.
If the playback sound still cannot be heard after raising the vol-
ume some, adjust the volume on the monitor, TV, amplifier or
other sound output equipment.
NOTE
If the remote control -/+ (VOLUME) buttons do not function,
on the HOME screen, select Settings > Audio Settings > Audio
Output > Volume Control and set it to Enable.
Muting with this unit
By pressing the MUTE button, playing sounds can be muted by
this unit.
When muted, the icon appears on the monitor.
Press the MUTE button again to stop muting. The
on the monitor. (This icon will disappear from the monitor after a
little while.)
icon appears