Publicidad
Idiomas disponibles
Idiomas disponibles
II. Press desired CHASE while holding Auto/DEL.
5.
CLEAN ALL CHASE (ALL SCENES are still available)
I . Press DOWN+Auto/DEL while turning power off.
II. Turn the power on.
RUNNING SCENES
•
Turn the power on; it is in MANUAL RUN mode. When in PROGRAM mode, press PROGRAM
for 2 seconds, PROGRAM LED goes out, it enters MANUAL mode.
•
If there is not any scene having been programmed in a bank, the scene can't be run; only the
SCENES having been programmed are executed.
•
If the fades is set to OFF, Scene will execute channel program setting.
1. MANUAL RUN
I. Extinguish AUTO triggered LED and MUSIC triggered LED.
II. Select a bank (using ↑or↓,MIDI signals through MIDI interface)
III. Press scene to run scene.
IV. Run scene-using MIDI.
2. AUTO RUN
I.
Press AUTO/DEL, corresponding LED is ON.
II.
Press TAP SYNC/DISPLAY, Press it once more after some time, the interval between two
pressing is assigned to the speed of AUTO RUN, the maximum limit is 10 minutes. If there are
many pressings more than twice, the last two pressing are designated.
III. Select desired bank, using UP or DOWN via MIDI signals.
IV. Press Auto/DEL once more to withdraw AUTO RUN mode.
3. MUSIC RUN
I. Press music/Bank copy, corresponding indicator lights, scene run is engaged into MUSIC RUN.
II. Select desired bank, using UP or DOWN or via MIDI signals.
III. Press music/bank copy once more to withdraw MUSIC RUN.
4. MIDI RUN
Select bank to run scenes using MIDI whenever it is in MANUAL RUN, AUTO RUN or MUSIC RUN.
5. CHASE RUN
I. CHASE RUN requires making programs, when running CHASE, scene will be step auto
matching.
II. CHASE RUN includes MANUAL RUN, AUTO RUN, ATDIO RUNS, and MIDI RUN.
III. Either one CHASE more can be run in the order of selection.
IV. Press CHASE, Corresponding indicator lights, which indicates it, is in CHASE RUN.
6. FADE TIME CONTROL
Move the slider to adjust FADE TIME, Output varies accordingly.
English
Pag. 8
TR-MQ 1000
TR-MQ 1000
Publicidad
